Take a fresh look at your lifestyle.


When someone becomes incapacitated, using the restroom can become a nightmare, especially if a nurse or family member is required. A well-constructed handicapped bathroom will frequently enable a disabled person to shower or bathe independently. Here are some suggestions for creating a shower that is handicap accessible.

A walk-in shower

A bathroom with a shower that is level with the rest of your home’s flooring is doable. This makes it possible to enter the shower in a wheelchair (ideally one made to be submerged in water) and makes it quite simple to enter and leave the shower on foot. Despite being less secure than a bathtub with a door due to the increased chance of falling, a walk-in shower provides a quicker bathing experience.

Ability to maneuver a wheelchair

The more room in the bathroom, the easier and safer it will be to navigate it in a wheelchair. Handicap shower stalls offer a doorless shower with plenty of space for wheelchairs. When installing this kind of shower, the vanity should be raised off the ground for more accessibility. That makes it possible for a wheelchair to roll up to the sink.

A wheelchair-accessible sink

A wheelchair-accessible bathroom vanity can make it incredibly simple for a person with a disability to brush their teeth and wash their hands. For a person in a wheelchair, a sink should be no higher than 30 inches, and 34 inches is too high. A 40′′ sink height is advised for a very tall person who is not a wheelchair user but has problems bending.

Seats and grab bars in the shower

You should install a stylish grab bar on the bathroom walls to make it easier for your loved ones to move around. The railings should be slick and simple to hold. Adding seats and grab bars provides safety for people with disabilities. The bathtub, shower, and area surrounding the toilet should all have ADA-compliant grab bars. Even if you are forced to construct a small bathroom, there is always room for grab bars because the bathroom design is standard.

Bathroom entryway

The bathroom should feature a zero-step entrance without a door to make it simple for a disabled person to enter and exit. Sliding doors can be utilized if seclusion is necessary, but a wraparound entrance or curtain that offers privacy without creating a physical barrier is preferred. A handicap-accessible bathroom’s entry should be at least 32 inches wide. The ideal doorway width is 36 inches if turning a wheelchair through it is necessary.

Slip-resistant surfaces

There are non-slip flooring options for the bathroom floor, shower, and bathtub. People who are elderly or disabled are far more likely to fall in the restroom, especially if the floor is damp. They are much more likely to have a severe injury when they slip. A quick and inexpensive approach to making the restroom safer for people with disabilities is to treat the floor with a slip-resistant coating.


An ADA-compliant bathroom has various advantages, including increased safety and accessibility. It is safe for those with mobility issues to enter and use the shower.

Comments are closed.